Esky E012 Lama V3 CoAxial -

Description: 4 channel proportion radio control, 4 in 1 electronic board includes 2 speed controllers for 2* main motor,a mixer,a gyro.Left/Right,Up/Down,Front/Back, control (THROTTLE,AILERON,ELEVATOR AND RUDDER).It Flies stably and silently indoor and outdoor, just as walks in the air,enable you and your family to get warmer ane enjoyment.LAMA2 which is with double-sharing-one-axis structure and with stable and silent flight.is designed by professional engineers.for the beginner,it is designed with simple glying operation and easy to learn how to fly.You can be familiar with its operating way and enjoy the flying in short-term.The helicopter is with two swing -hammers that improve the ability to settle its axis and enable it to hang in the air more stable.The helicopter is designed with double-blade-sharing-one-axis that enables it to easy be operated and fly.The battery hang is designed with simple and firm structure that enables the battery easy loaded and unloaded.With power supply of Li-polymer battery enable it to fly lighter and longer.Complete set,ready to fly. Co-Co Lama is not a flimsy toy, it's an extremely well-built and well-designed radio controlled model helicopter. The 72 mHz radio, the motors, and servos are hobby quality products that will provide many hours of service. If you ever wanted to fly a micro electric helicopter but were put off by the difficulty of flying a helicopter, Co-Co Lama is for you. Specifications: Main rotor diamenter: 340mm Weight:215g Length: 360mm Power system:180 motor*2 KIT/ART/RTF:RTF Transmitter: 4ch Mix controller: 4 in 1 controller (W/gyro.mixer,ESC,receiver) Servo: 8g,1.3kg/cm,0,12s/60 Battery:7.4v800mAh Li-polymer battery Package Include: 4CH Transmitter New design 4 channels helicopter (pre-built,zero assembly time) New 4 IN 1 electronic board: Receiver + Speed Controller + Mixer + Gyro Powerful 2* main motors type 180 Two 8g mini servos One pair of crystals 7.4V800mAh Li-Po battery AC/DC Balance Charger-AC Input:AC110v-230v.DC input:12-15v.Output:3 pins BNC for 7.4v Li-Po battery (2 cells) with balance BNC/4 pins BNC for 11.1v Li-Po battery (3 cells) with balance BNC English Manual Extra Plastic Main Blades

Well designed installation of servos, receiver, and rechargeable battery	Easy to understand quick-reading instruction book tells exactly how helicopters fly. Shown with the included spare rotor blades.	Contra-rotating, single axis rotors cancel torque effects.
Recharge the flight battery with the included charger that you connect to your 12 volt automobile battery.	High quality transmitter with dual axis control sticks.	2 cell 7.4 volt 800 mAh li-poly battery pack included. Buy an extra battery pack (below) so you can fly one while charging the other!